Simplicity

SP Display		Program Pattern Display		Remaining Segment-time Display		Remaining Repetition Display
		overview
TSP Display		Program Pattern Display		Segment Number Display
		Soak and ramp
Event Display

* The same operation displays as those of the UT are also available. Fast-forwarding of program operation
Use this function when checking the program pattern setting. Only times of segments and time events can be faster.

Program pattern-2 retransmission
The controller can serve as a program pattern generator.


Synchronized program operation
If the progress of the operation of one unit is faster, the program operation can be forcibly stopped by digital input when switching between segments. Thus, synchronized program operation can be performed.

The controller menus and layout are adjusted in accordance with the level (EASY, STD, PRO) of information required by the user. If simple temperature or level control is needed, then select the easy configuration. Very sophisticated applications are no problem for the UTAdvanced. Just select the PRO setting and make use of the additional functionality shown in this mode. Advanced applications can be programmed in the PRO setting and then changed back to the easy setting to lock out functions not required by operators.

With Yokogawa’s Active color display you can instantly tell, at a glance, the status of your process.
Alarm Status: Active color display changes from white (normal) to red (alarm).
Deviation Status: Color changes based on a PV deviation from SP.
User-defined Color: Choose between white or red display for constant Readings.

The 65-mm depth of the controller reduces the constraints on installation location.

The navigation keys is an intuitive method to navigate the controller’s configuration menus and setting its various menus. Navigation arrows even tell you what button to push next.

It is easy to assign frequently used functions, such as the operation mode switch, Run/Stop, program pattern selection, Remote/Local, alarm latch release, and PID parameter display. The function of an external switch can also be assigned to the front panel key in conjunction with a ladder sequence program.

 

The UTAdvanced is equipped with a scrolling text feature that fully lists the parameter being modified. There is no guessing what parameter you are looking at. It is possible to turn off scrolling the text function.

 

The UTAdvanced is fluent in multiple languages — English, Spanish, French, and German. The use of the UTAdvanced by local language operators is not an obstacle.

Parameter values (SP, P, I, D, ALM1, etc.) configured by the user can be stored in the controller as the default values. Even if a parameter set value is accidentally changed, it can be restored to the original value with a simple operation.

 

Now you can choose a color that matches your work area: white (light gray), or black (light charcoal gray).

LL50A Parameter Setting Software (sold separately) allows for easily setting parameters.
Using the message function and turning the contact input on/off, the message registered beforehand can be displayed on PV display by interrupt.The message is registered using LL50A Parameter Setting Software.The messages are limited to 20 alphanumeric characters. A maximum of four messages can be registered.
Minimum parameters necessary for operation can be set. The password function can prevent inadvertent changes to the parameter settings. If a password is set, the password is required when moving to the Setup Parameter Setting Display. When the password is verified, can be changed to the Setup Parameter Setting Display.